Honda Accord Sensor Logic Failure
Honda Accord Sensor Logic Failure. Drivers are reporting difficulty with the vehicle’s starter failing, often just after the warranty expires. After this code is cleared there is a tcs pressure sensor neutral position memorization that needs to be done.
After this code is cleared there is a tcs pressure sensor neutral position memorization that needs to be done. Clear the dtc using the hds. Go to your local car wash and clean the wheels first.
What That Means Is, If There Are Supposed To Be 58 Pulses Between The Reference Pulses, And 57 Or 59 Are Seen, This Fault Code Will Set.
You can do this without the honda test equipment by grounding terminal 9 at the dlc(brown wire) where is says to short the scs. 2004 honda accord ex 3.0l level sensor. 3) after abs light turns on again, quickly press (within 0.5s) the vsa off button.
Firstly, Clear The Trouble Codes, And Then Perform This Function.
I have a code 65 level sensor and 84 logic failure. 1) jump pin 9 to chassis ground. Searched web for two days w/o success.
I Tried Running A Obd2 Code Reader From Autozone, But It Only Indicates Check Engine Lights, Not Abs Or Vsa Honda Dts Codes.
I have put our diagnostics machine on it and it comes up with: The dealer has told me that my vsa module is at fault and needs to be replaced. Are any other dtcs indicated?
We Dont Have Any Info.
The logic module must be reset and the engine cranked to see if the sensor is working. On this, does anyone know what this relates to? Clean and regrease any corroded connectors with dielectric grease and repair any shorts.
Read News Stories About Honda Crv Sensor Logic Failure.
P0718 mainshaft speed sensor intermittent failure p0720 countershaft speed sensor circuit malfunction p0720 p0721 This leaves drivers on the hook for the $700 bill to replace the starter. If you don't replace ecu or sensor cluster of vsa, you should not perform this function.
Post a Comment for "Honda Accord Sensor Logic Failure"