18Mm To 12Mm O2 Sensor Reducer
18Mm To 12Mm O2 Sensor Reducer. This means you'll have to drill out the stock 12mm holes, grind down the existing bungs (if left alone they'll be too deep for the o2 sensor) and weld the new ones in. **18mm to 12mm oxygen sensor adapter may be required on some models.** all of our pipes run 18mm o2 bungs so you can run an auto tune system with wideband o2 sensors.
Oxygen o2 sensor reducer from 18mm to 12mm suit harley indian buell victory etc. I see where some tuners require 18mm instead of 12mm. Very fast shipping and excellent product imo.
Regular Price Unit Price / Per.
Freedom performance o2 sensor bung reducers, 18mm > 12mm. It fits on my full system exhaust that i ordered and it came with 18mm o2 sensor hole instead of the 12mm but this adapter did the trick. To further clarify, the oem bung is rather thick.
If You Don't Grind Down The Oem Bung And Install The New Bung On Top Of It, The O2 Sensor.
I'm not sure the reason. Will fit 2014 & older harley models. (2) raw steel o2 sensor plug adapters.
Go From 18Mm To 12Mm Bung Size.
First, i removed the stock sensor and put a 5/8 dowel 6 inches long into the hole to simulate the drill bit and see exactly where straight is. Older models have the 18mm threaded size. I'm looking at the bungs on my power duals and trying to understand just how involved it is to change them out.
These O2 Sensor Adapter Allows Late Models That Use 18Mm O2 Sensor Ports To Install Exhausts With 12Mm O2 Sensors.
(2) raw steel o2 sensor plug adapters. Free shipping for many products! Threaded outer and inner adapters reduce o² sensor port from 18mm to 12mm allowing riders to use exhaust pipes on newer model motorcycles.
5.0 Average Based On 1 Product Rating.
Angled 18mm oxygen senseror reducer suitable for blow performance exhausts front pipe when motorcycle or components are modified, causing the front oxygen sensor to touch the oil filter or other parts of the motorcycle. Vance & hines exhaust port gasket kit 22899. These o2 sensor adapter allows late models that use 18mm o2 sensor ports to install exhausts with 12mm o2 sensors.
Post a Comment for "18Mm To 12Mm O2 Sensor Reducer"