Heat Sensor Labels For Fire Ladders
Heat Sensor Labels For Fire Ladders. These labels are heat sensitive material that turn black if any heat is ever present that is greater than approximately 300 degrees f. Ladder technologies heat sensor labels indicate when a ladder needs to be taken out of service for testing due to exposure to excessive heat.
If the heat sensor label has an expiration date and that date has passed, or there is no date on the label, the heat sensor label shall be replaced. Labels are laminated to resist changing color incorrectly due to exposure to elements, smudging and fading. Once aluminum fire ladder materials reach this 300 degree f temperature (even if only for a moment), the ladder material may have lost at least 25% of its load capacity.
(2) Four Heat Sensor Warning Labels Are Required On Each Section Of The Ladder.
Whenever the heat sensor label has changed color, indicating heat exposure. If the sensor turns black in the middle, the ladder is to be taken out of service and subjected to a horizontal bend test per nfpa 1932, and if it passes that test it may be put back into service so long as no other damage has. After the ladder has been subjected to impact loading or unusual conditions of use.
Roof Ladder (Duo Safety) The Skull Saver Ladder Cover.
This ladder also features heat sensor labels that indicate when the ladder has been exposed to too much heat. Our fully trained inspectors are knowledgeable in all aspects of nfpa 1932 and are familiar with all types of ground ladders. Once aluminum fire ladder materials reach this 300 degree f temperature (even if only for a moment), the ladder material may have lost at least 25% of its load capacity.
The Heat Sensor Was Developed To Show That A Ground Ladder Has Been Heated Above 300 Degrees, Per Nfpa 1932 Requirements.
Labels are laminated to resist changing color incorrectly due to exposure to elements, smudging and fading. Made with reflective labels, this element increases the ladder’s visibility. For folding ladders, the heat sensor labels shall be permitted to be applied to either the inside or outside of the ladder and shall be.
Preset To 300 Degrees F And Must Have The.
The fire service ladder is one of the most basic fire fighter tools. Heat sensor label label affixed to the inside of each beam of each ladder section; Ladder technologies heat sensor labels indicate when a ladder needs to be taken out of service for testing due to exposure to excessive heat.
A Piece Of Equipment Specifically Designed To Secure A Fire Fighter To A Ladder Or Elevated Surface.
It is compact and lightweight, capable of fitting in most fire engine storage spaces. These labels are heat sensitive material that turn black if any heat is ever present that is greater than approximately 300 degrees f. (6) if the heat sensor label has an expiration date, and that date has passed, the heat sensor label must be replaced.
Post a Comment for "Heat Sensor Labels For Fire Ladders"