Water Level Sensor Specifications

Water Level Sensor Specifications. Supply voltage 230 v ac 1 phase 415 v ac 3 phase 110 v ac 1 phase 24 v dc out put 1 co contact 5 a sensing voltage/current 10 v ac/ less. The sensors specifications of water level and temperature instrumentation are listed in table 1, and the measured water level and temperature are.

Water Level Sensor Depth of Detection Water Sensor for from www.ebay.com

Wl400 water level sensor specify water level range: 5, 10, 20, 35, 70 meters freshwater. The water contains minerals and impurities is conductive.

Source: www.arduinopak.com

Ultrasonic or sonic devices measure the length of time it takes for a reflected sound wave to return to a transducer. 70 l x 60 w x 110 d mm standard specifications description/model wlc1d wlc1d4 wlc1d1 wlc1d24 aux.

Source: www.engineersgarage.com

Here is a quick list of the components that are required to get started with this arduino and water level sensor project: In our daily life we need to detect the level of water like in water tank at the top of roof which is not directly accessible and in laboratories where specific level of any liquid is required to be monitored.

Source: www.thegeekpub.com

The optomax digital water level sensor is ideal for applications with restricted space that require a miniature, low power and low cost sensing solution. Technical specifications supply voltage (vs) 4.5vdc to 15.4vdc or 8vdc to 30vdc supply current (ls) 2.5ma max.

Source: www.ebay.com

This soil moisture sensor module is used to detect the moisture of the soil. The optomax digital water level sensor is ideal for applications with restricted space that require a miniature, low power and low cost sensing solution.

Source: www.thegeekpub.com

(gnd) pin is for the ground connection. Technical specifications supply voltage (vs) 4.5vdc to 15.4vdc or 8vdc to 30vdc supply current (ls) 2.5ma max.

Source: www.hotmcu.com

Transmitted time is proportional to level. Device emits a microwave pulse toward process material;

(Vs = 15.4Vdc) Or 7.5Ma Max.

This soil moisture sensor module is used to detect the moisture of the soil. It measures the volumetric content of water inside the soil and gives us the moisture level as output. There are three ultrasonic water level sensor ranges available including 3 ft, 12 ft, and 48 ft to meet a wide variety of applications.

Level Sensors Can Be Broken Into Two Classifications;

Point level measurement indicates when a product is present at a certain point and continuous level measuring indicates the continuous level of a product as it rises and falls. In such applications water level sensor is very useful. Floats at the level of water.

It Is A Hydrostatic Sensor Which Measures Water Level By Sensing The Pressure Of The Water Above.

The specifications of water level sensors are 0utputs: The pulse is reflected back by surface of material and picked up by receiver. Includes 25' cable (specify range upon order placement) wlexc extra cable cable length is measured from end of cable to bottom of sensor.

The Pump Motor Starts When Water Level Reaches To U Level And Stops When Water Level Goes Below L Level.

Analog output will vary depending on the voltage provided to the sensor. The water contains minerals and impurities is conductive. Water level sensor is used to measure water level in water tank or in any other equipment.

Water Level Sensing At Different Level.

The output resolution is 3 mv, which corresponds to a length resolution of 0.001 over the calibrated length. 60 x 20mm, contacts 45mm,. The water level sensor is made of ceramic and titanium which offers extremely high corrosion resistance suitable for harsh water environments.