Skip to content Skip to sidebar Skip to footer

Concept 2 Sensor Wire

Concept 2 Sensor Wire. If your monitor lights up with zeros but the display does not change when you begin rowing, you may need to replace this part. If the cable or cable housing is cut or broken you will definitely need to replace this part.

Model MDHC4D Thin 2wire throughtype proximity sensor
Model MDHC4D Thin 2wire throughtype proximity sensor from www.sensatec.co.jp

Sensor wires can fail, but the usual cause is going to be something chewing through the wire or some trauma when the machine is broken in two and the monitor arm is folded. For use with model d and e indoor rowers and the skierg. If your monitor lights up with zeros but the display does not change when you begin rowing, you may need to replace this part.

This Product Is No Longer In Stock.


If the cable or cable housing is cut or broken you will definitely need to replace this part. This is the sensor coil for the power generator that transmits flywheel motion to and generates power for the performance monitor on your indoor rower or skierg. Page 2 press on the new tuflok screw head to expand its base and attach the pickup to the frame.

Concept 2 Model C Indoor Rower Monitor Pickup Sensor Wire/Cable & Screw Kit


Amounts shown in italicised text are for items listed in currency other than euros and are approximate conversions to euros based upon bloomberg's conversion rates. If you've not done that then call concept2 uk (0115 9340140) and ask them for help. Dedicated to excellent service and your success.

The Assumption Is That Some Kind Of Electronic Camera (Webcam, Cell Phone, Etc) Will Be Available On An Ad Hoc Basis, But Is Not Permanently Dedicated To The Instrument.


1.select an area behind the dash to mount the control unit using wire ties, but do not permanently af fix it until all wiring and testing is complete. For use with model b indoor rowers only. This is the sensor coil for the power generator that transmits flywheel motion to and generates power for the performance monitor on your indoor rower or skierg.

If Your Monitor Lights Up With Zeros But The Display Does Not Change When You Begin Rowing, You May Need To Replace This Part.


This is the pickup (sensor) and cable (wire) that transmit flywheel to the performance monitor on your indoor rower. If your monitor lights up with zeros but the display does not change when you begin rowing, you may need to replace this part. If your monitor lights up with zeros but the display does not change when you begin rowing, you may need to replace this part.

Shrinking Length Of Analogue Sensor Cables Due To Locating The M=Bus ® Units Near Or In The Transducers.


You may save your £20 if it's a warranty repair. Unplug the monitor pickup wire and inspect it for frays or breaks. If there is a crack in the port, the monitor will need to be replaced.

Post a Comment for "Concept 2 Sensor Wire"